Reference pants |
All cut out |
With the pattern I "used". It didn't have any pockets so I added them and it was bell bottomed and I straightened them |
I didn't have much fabric left over! |
My pockets |
I added twill tape tabs on the pocket flaps |
Pocket flaps pinned together and cargo pockets folded in half |
Rolled hem for the top of the back pockets |
The pocket facings pinned on |
All the pockets ready to sew |
After I sewed the tops of the back pockets, I also sewed a double line of stitching in the middle of the pockets |
Pocket flap progression (sewn, corners clipped, turned, top stitched) |
Sew along the edge of the pocket facing |
Sew 1" from fold on cargo pockets and iron open |
The pleat in the cargo pockets |
I matched up the flaps with the pockets |
I pinned under 1/4" along the edges of the pockets |
And ironed them |
Cargo pockets waiting to be sewn on. |
I placed the pants front on top of the pants back matching edges |
Lay the pocket right side down on top |
Pin the edges |
Turn over and pin along the edge of the pocket |
Sew along the cut edge for the front pocket |
Iron pocket towards pants front |
Trim excess pocket off |
Fold pocket to back and iron |
Top stitch along edge of pocket |
Match pocket front to back and sew bottom edge |
I didn't figure exactly right so my pocket facing isn't quite long enough |
I did a better job on the 2nd pair! |
Fold pocket to front |
Front of pants pinned to back of pants |
Sew together |
Trim seam |
Zig zag |
Sew seam allowance to one side |
All ready for cargo and back pockets |
Sew velcro to pockets and flaps |
I stuck the pocket flap in the front pocket so I wouldn't mix them up |
Pockets sewn |
Sew top of front pocket to hold it in place |
My sewing machine does bar tacks, so I added those at the tops of the pockets |
Sew inseams |
Trim seam |
Zig Zag |
Turn one leg right side out |
and put it inside the other leg |
Pin and sew crotch seam |
Trim seam and notch curved edges |
Zig Zag, pulling the seam straight as you go |
Sew seam allowances down |
Mark out fake fly |
Sew fake fly |
Rolled hem (or measure and turn up for needed length) |
Turn down for elastic casing. I added twill tape size tags |
Thread elastic through |
Sew opening closed |
Sew elastic along all 4 seams to hold it in place |
Model on adorable children ☺ |
1 comment:
Nice work, Becky.....
Post a Comment